Tag Archives: chain roller

China Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear cycle gear

Product Description

SPROCKET  1/2” X 5/16”  08B Series SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C one.3mm
Tooth Width b1 7.0mm
Tooth Width B1 seven.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B Sequence ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 ten
nine forty one.0  37.13  eight ten ten
ten forty five.2  forty one.10  eight ten 10
eleven forty eight.7  45.07  10 10 12
12 53.0  forty nine.07  10 10 twelve
13 fifty seven.4  53.06  ten ten 12
fourteen 61.8  57.07  10 ten twelve
fifteen 65.5  61.09  ten 10 twelve
sixteen 69.5  65.10  ten 12 16
17 73.6  sixty nine.11  ten 12 16
eighteen 77.8  seventy three.14  ten 12 sixteen
19 81.7  77.16  ten twelve 16
twenty 85.8  eighty one.19  ten 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  twelve 16 16
23 ninety eight.2  ninety three.27  twelve 16 sixteen
24 one hundred and one.8  97.29  twelve sixteen 16
twenty five a hundred and five.8  one hundred and one.33  twelve 16 16
26 110.0  one hundred and five.36  16 sixteen sixteen
27 114.0  109.40  16 sixteen 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
thirty 126.1  121.50  sixteen sixteen 16
31 one hundred thirty.2  a hundred twenty five.54  sixteen 16 20
32 134.3  129.56  sixteen sixteen twenty
33 138.4  133.60  sixteen 16 twenty
34 142.6  137.64  sixteen 16 20
35 146.7  141.68  sixteen sixteen twenty
36 151.0  a hundred forty five.72  16 20 20
37 154.6  149.76  sixteen twenty 20
38 158.6  153.80  sixteen 20 20
39 162.7  157.83  sixteen 20 20
40 166.8  161.87  16 twenty twenty
41 171.4  one hundred sixty five.91  20 twenty twenty five
forty two a hundred seventy five.4  169.94  20 twenty twenty five
forty three 179.7  173.98  20 twenty 25
forty four 183.8  178.02  twenty 20 twenty five
forty five 188.0  182.07  20 20 25
forty six 192.1  186.10  twenty 20 25
47 196.2  one hundred ninety.14  20 20 25
forty eight two hundred.3  194.18  20 twenty 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
fifty one 212.1  206.30  20 twenty five 25
52 216.1  210.34  20 25 25
fifty three 220.2  214.37  20 twenty five twenty five
fifty four 224.1  218.43  20 25 twenty five
55 228.1  222.46  twenty twenty five twenty five
fifty six 232.2  226.50  20 25 twenty five
57 236.4  230.54  20 25 twenty five
58 240.5  234.58  twenty 25 twenty five
fifty nine 244.5  238.62  20 25 25
60 248.6  242.66  20 twenty five twenty five
sixty two 256.9  250.74  25 25 25
64 265.1  258.82  twenty five twenty five 25
sixty five 269.0  262.86  25 25 25
sixty six 273.0  266.91  25 25 25
sixty eight 281.0  274.99  twenty five twenty five twenty five
70 289.0  283.07  twenty five twenty five twenty five
seventy two 297.2  291.15  25 25 25
75 309.2  303.28  25 twenty five twenty five
76 313.2  307.32  twenty five 25 25
78 321.4  315.40  twenty five 25 25
eighty 329.4  323.49  25 twenty five twenty five
85 349.0  343.69  twenty five 25 twenty five
90 369.9  363.90  twenty five twenty five 25
95 390.1  384.11  25 twenty five twenty five
one hundred 410.3  404.32  25 twenty five twenty five
a hundred and ten 450.7  444.74  25 twenty five 25
114 466.9  460.91  25 twenty five twenty five
120 491.2  485.16  twenty five twenty five 25
a hundred twenty five 511.3  505.37  25 25 25

Standard Information.

Variety:

Simplex, Duplex, Triplex

Sprocket Product:

three/8″,1/2″,5/8″,3/4″,1″,1.twenty five”,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.fifty”, 3″

Tooth Quantity:

9-a hundred

Regular:

ANSI , JIS, DIN, ISO

Materials:

1571, 1045, SS304 , SS316  As Per Consumer Ask for.

Functionality Treatment:

Carburizing, Higher Frequency Remedy, Hardening and Tempering, Nitriding

Floor Treatment method:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and many others
Design and style criterion ISO DIN ANSI & Buyer Drawings
Software Industrial transmission equipment
Package deal Picket Scenario / Container and pallet, or produced-to-get

Certification:

ISO9001 SGS

Good quality Inspection:

Self-check and Closing-check

Sample:

ODM&OEM, Demo Purchase Available and Welcome

Benefit Top quality initial, Support 1st, Competitive value, Quickly shipping
Delivery Time ten times for samples. 15 days for official order.

 

Installation AND Using

The chain spocket, as a push or deflection for chains, has pockets to hold the chain back links with a D-profile cross part with flat side surfaces  parallel to the centre airplane of the chain back links, and outer surfaces at appropriate angles to the chain link centre airplane. The chain links are pressed firmly from the outer surfaces and each of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the assist surfaces of the wheel human body collectively with the end sides of the webs formed by the top and trailing walls of the pocket.

Discover

When fitting new chainwheels it is very important that a new chain is equipped at the identical time, and vice versa. Employing an old chain with new sprockets, or a new chain with old sprockets will lead to quick use.

It is critical if you are putting in the chainwheels your self to have the manufacturing facility provider guide specific to your product. Our chainwheels are created to be a direct alternative for your OEM chainwheels and as this sort of, the installation ought to be executed in accordance to your versions service guide.

In the course of use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched a lot more than the over optimum allowance brings about the chain to journey up the teeth of the sprocket. This triggers harm to the suggestions of the chainwheels tooth, as the power transmitted by the chain is transmitted fully through the top of the tooth, rather than the entire tooth. This final results in extreme sporting of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Expectations companies (this sort of as ANSI and ISO) maintain specifications for layout, proportions, and interchangeability of transmission chains. For instance, the pursuing Table exhibits data from ANSI common B29.1-2011 (Precision Energy Transmission Roller Chains, Attachments, and Sprockets) developed by the American Culture of Mechanical Engineers (ASME). See the references[8][9][ten] for added information.

ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Common Sizes
Size Pitch Greatest Roller Diameter Minimal Ultimate Tensile Power Measuring Load
25 .250 in (6.35 mm) .a hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.53 mm) .two hundred in (5.08 mm) one,760 lb (800 kg) 18 lb (8.2 kg)
forty one .500 in (12.70 mm) .306 in (7.seventy seven mm) one,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.92 mm) three,125 lb (1,417 kg) 31 lb (fourteen kg)
50 .625 in (15.88 mm) .four hundred in (ten.sixteen mm) 4,880 lb (2,210 kg) forty nine lb (22 kg)
sixty .750 in (19.05 mm) .469 in (eleven.ninety one mm) 7,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
80 one.000 in (twenty five.forty mm) .625 in (15.88 mm) twelve,five hundred lb (5,seven hundred kg) 125 lb (fifty seven kg)
100 1.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
a hundred and twenty 1.500 in (38.10 mm) .875 in (22.23 mm) 28,a hundred twenty five lb (12,757 kg) 281 lb (127 kg)
one hundred forty one.750 in (44.forty five mm) one.000 in (25.forty mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.fifty eight mm) fifty,000 lb (23,000 kg) five hundred lb (230 kg)
180 two.250 in (57.15 mm) one.460 in (37.08 mm) sixty three,280 lb (28,700 kg) 633 lb (287 kg)
200 two.500 in (63.fifty mm) one.562 in (39.67 mm) 78,one hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 three.000 in (seventy six.20 mm) one.875 in (forty seven.63 mm) 112,five hundred lb (fifty one,000 kg) one,000 lb (450 kg

For mnemonic purposes, below is one more presentation of crucial proportions from the very same regular, expressed in fractions of an inch (which was part of the contemplating behind the decision of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI normal
chain variety
Width (inches)
one4 2eight two5 one8
three8 38 threefive three16
12 4eight four1 onefour
onetwo four8 4 516
58 5eight five three8
three4 68 six one2
1 eight8 eight fiveeight

Notes:
1. The pitch is the distance amongst roller centers. The width is the length amongst the website link plates (i.e. slightly a lot more than the roller width to let for clearance).
2. The right-hand digit of the common denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The still left-hand digit denotes the variety of eighths of an inch that make up the pitch.
four. An “H” pursuing the normal variety denotes heavyweight chain. A hyphenated quantity subsequent the standard variety denotes double-strand (2), triple-strand (3), and so on. As a result 60H-3 denotes number sixty heavyweight triple-strand chain.
 A standard bicycle chain (for derailleur gears) employs slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load capability. The much more sprockets at the rear wheel (traditionally 3-6, today 7-12 sprockets), the narrower the chain. Chains are marketed in accordance to the number of speeds they are made to function with, for case in point, “ten velocity chain”. Hub gear or one speed bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the optimum thickness of a sprocket that can be used with the chain.

Usually chains with parallel shaped back links have an even number of hyperlinks, with each narrow link adopted by a broad a single. Chains developed up with a uniform variety of hyperlink, narrow at 1 and wide at the other finish, can be manufactured with an odd amount of backlinks, which can be an benefit to adapt to a special chainwheel-distance on the other aspect this sort of a chain tends to be not so robust.

Roller chains made making use of ISO common are sometimes known as as isochains.

 

WHY Pick US 
 

1. Reliable Good quality Assurance Method
two. Slicing-Edge Pc-Controlled CNC Equipment
three. Bespoke Answers from Extremely Skilled Experts
four. Customization and OEM Obtainable for Particular Application
5. Substantial Stock of Spare Parts and Components
6. Effectively-Designed Throughout the world Marketing Community
seven. Successful After-Sale Support Program

 

The 219 sets of superior automatic generation gear give assures for higher product quality. The 167 engineers and technicians with senior skilled titles can style and create merchandise to meet up with the actual demands of customers, and OEM customizations are also accessible with us. Our audio international services community can supply consumers with well timed following-product sales technological services.

We are not just a maker and supplier, but also an business specialist. We operate professional-actively with you to provide professional advice and item suggestions in order to finish up with a most value efficient item available for your certain software. The clients we provide globally assortment from finish users to distributors and OEMs. Our OEM replacements can be substituted where ever needed and suited for the two mend and new assemblies.

 

US $0.12-3
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $0.12-3
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?

Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.
Gear

Hypoid bevel gears

In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.
Gear

Straight spiral bevel gears

There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.
Gear

Hypoid gears

The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.

China Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear     cycle gearChina Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear     cycle gear
editor by czh 2023-01-06

China Good quality Sharp Top Roller Chain near me factory

Sharp Top Roller Chain

* HD : Heavy Duty Type

* Machine Bottom is available when required

MAXTOP CHAIN NO. W T1 T2 T3 C L Average
 Ultimate
Strength
kgf

Approx

 Weight
kg/ft

100 ST 19.3 4.7 4.0 41.6 11600 2.15
100-2 ST 19.3 4.0 4.0 7.7 35.8 77 23200 3.90
100-2 STA 19.3 4.0 4.0 7.7 35.8 77 23200 4.15

                                       * Machine Bottom is available when required

in Hong Kong China, Hong Kong SAR sales price shop near me near me shop factory supplier Double Sprocket for Two-Strand Roller Chain Sunstar Sprockets manufacturer best Cost Custom Cheap wholesaler

  in Hong Kong China, Hong Kong SAR  sales   price   shop   near me   near me shop   factory   supplier Double Sprocket for Two-Strand Roller Chain Sunstar Sprockets manufacturer   best   Cost   Custom   Cheap   wholesaler

The new goods consist of a series of large-tech and high top quality chains and sprockets and gears, these kinds of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator stage-chains, large-speed tooth chains, timing chains, self-lubrication chains, amongst which have variety large velocity tooth chain for vehicle department dynamic box and aerial chains fill in the blanks of chain in China. We are seeking ahead to building successful business interactions with new consumers all around the entire world in the foreseeable future. we have acquired the trust of buyers globally. EPTT EPT for two-strand roller EPT sunstar sprockets

Specification:

one.EPT EPTT, Brass, Bronze, Copper, Hardened EPTs , steel,EPT ect
2.Tolerance /-.05mm
3.Finishing tooth hardended,black oXiHu (West EPT) Dis.dation,zinc plated ect.
four.Edges and holes debarred
five.Surfaces free of scratches
six.EPT capabilities EPT, stainless steel, copper, plastic and far more
7.Various components and ending waEPTTare accessible
8.Non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPT merchandise
9.EPT and ending comply with RoHS Directive
ten.Little orders are welcome

EPTnical Information

EPTnical Process

CNC machining, EDM W/C

Dimension

EPTT’s artwork is offered

Functionality

Milling:Length,machining variety up to 1100*600 mm

Turning: Diameter .05mm~300mm Length .5mm ~ 750mm

Wire Reducing: machining assortment can up to 450*400*300mm

EPT

Turning and Milling: /- .002mm( /-.000098 inch)

Wire Chopping: /- .002 mm ( /-.000098 inch)

Why Pick us:

one. Fully Machining Providers:

Gringing components , Machining elements, CNC milling and turning areas , CNC milling elements, CNC
metal components, grinding parts, stamping components, casting and forging areas, assembly provider.

two.Different Machining EPTs:

EPT areas, stainless metal components, alloy metal components ,brass elements, bronze components, copper
parts, EPT areas, plastic areas, ect.

three.Different Finishes:

Anodizing, Electroplating, PoEPTTng, PowEPTTCoating, Blacken, Hardening, Portray and
a lot of other therapy of the elements.

four.EPTT Assurance :

IPQC examine every precision grinding areas during each processing phase one hundred% inspection ahead of cargo by micrometer, heigEPTT gauge, projector measuring EPTT, coordinate
measuring EPTT(CMM), ect. Any disqualification will be responsible by us.

five.Edge:

1 gt.Non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd/stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd/OEM/ODM/EPT service provided

two gt No MOQ, no quantity restricted

three gtFast direct time

4 gt Can satisfy DIN,JIS,ASTM,AISI,BS,GB stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd

Connected EPT

EPT Demonstrate
After Services

Welcome check with with us, we provider:

1. EPTT Remedy for your creation

2. Quick shipping for your urgent buy.
3.sandy 86 1868571157

  in Hong Kong China, Hong Kong SAR  sales   price   shop   near me   near me shop   factory   supplier Double Sprocket for Two-Strand Roller Chain Sunstar Sprockets manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Hong Kong China, Hong Kong SAR  sales   price   shop   near me   near me shop   factory   supplier Double Sprocket for Two-Strand Roller Chain Sunstar Sprockets manufacturer   best   Cost   Custom   Cheap   wholesaler

in Mendoza Argentina sales price shop near me near me shop factory supplier Steel 08b 12b 16b Roller Chain Sprockets manufacturer best Cost Custom Cheap wholesaler

  in Mendoza Argentina  sales   price   shop   near me   near me shop   factory   supplier Steel 08b 12b 16b Roller Chain Sprockets manufacturer   best   Cost   Custom   Cheap   wholesaler

EPG has set up a comprehensive established of high quality administration program which is provided with innovative inspection and test products. Because of to our wide item selection and prosperous ordeals in this business, In 2000, EPG took the guide in getting ISO14001 atmosphere management certification and thereafter passed the inspection of cleanse manufacturing and recycling economic system, profitable the title of “Zhejiang Environmentally friendly Business”.

Steel 08B 12B 16B Roller EPTT EPTs

EPTT sprocket is profiled wheel with tooth that meshes with a EPT, keep track of or other perforated or indEPTTd substance.
EPTs are utilised in bicycles, bikes, autos, tanks, and other EPTTry.
We professionally generate distinct types of EPTT sprockets, these kinds of as:

stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd sprockets
EPTTr bore sprocket
EPTT sprockets
platewheel sprocket
end bore sprocket
stock bore sprocket

All our items are produced strictly according to ISO9001 and exported to much more than 50 nations.

EPTs Function as fiollow:
one. EPT: C45, Stainless metal 304, A3 and so forth.
2. EPT precision is obtainable as for every your request.
three. EPT processing: EPT, solid iron, Machining(shaping, hobbing etc.)
4. Very good top quality with most aggressive cost.
5. Surface therapies these kinds of as high-frequency quenching and hardened tooth can be forty-fifty EPTC.
six. The EPTT rubber can be mounted on the teeth bottom to minimize the noise and put on.
seven. StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd and non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd sprockets

Primary EPT:
one. Timing Belt EPT (EPT EPT), Timing Bar, Clamping Plate
two. EPT, EPTT, Stampling Portion
three. V Belt EPT and EPTTper Lock Bush EPT, Idler and Plate WheelSpur EPT, EPTTl EPT, Rack
4. Shaft Locking Unit: could be substitute for Ringfeder, Sati, Chiaravalli, Tollok, and so on.
five. Shaft Coupling:incXiHu (West EPT) Dis.Hu (West EPT) Dis. Miniature couplings, Curved tooth coupling, EPTT coupling, EPTC coupling, Normex coupling, Sort coupling, GE Coupling, torque limiter, EPT EPTt
six. Shaft Collars: incXiHu (West EPT) Dis.Hu (West EPT) Dis. Setscrew Sort, Solitary Break up and EPTT Splits
7. EPT amp Rack: Spur EPT/rack, EPTTl EPT, helical EPT/rack
8. Other EPT Machining Parts in accordance to drawings (OEM).

A lot more Positive aspects:
one. Far more aggressive costs,
two. Shorter delivery date: 35 times.
3. We are the specialist manufacturer in the discipline of EPTT Trans. Parts,EPTTly for Timing EPTs.
four. Create stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd and non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd
five. Strict QC Management:ISO9001:2008,our engineer,Mr.EPT has EPTTized in the prodcution for over twenty several years.

EPTT amp EPT:
All the items can be packed in cartons,or,you can pick the pallet EPTT.
Created IN CHINA can be pressed on picket situations.Land,air,sea transportation are available.UPS,DHL,TNT,
FedEx and EMS are all supported.

EPTT:

SICEPTTN MIGEPTTY EPTTRY EPTTLtd., a subsidiary organization of ZheJiang EPTTry EPTT. ampExp. Corp(SCMIEC),which is a wholly said-owned EPTTrprise estabEPTTd in1980,EPTTized in making precision mechanical EPTT EPTT products. Soon after years of tough work,EPTT grow to be the EPTT business of a few producing factories and also the one of the biggest EPTTrprise provide EPTT EPTT components in western EPTT.

EPTT’s items are largely exported to Europe,The usa and Center EPT marketplace. With the top-ranking administration,skilled technical support and ample export encounter,EPTT has estabEPTTd long lasting and secure organization partnership with many world famous firms and has received good reputation from entire world vast clients in worldwide revenue.

Manufacturing unit See:

FAQ:
1. MOQ
A: EPTTly, 1 pc for stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd parts speak to for nonstXiHu (West EPT) Dis.Hu (West EPT) Dis.rd elements.

two. Shipping Time
A: In stock: within five functioning days. Out of stock: is dependent on your orEPTTquantity.

3. How To Select
A: element variety or drawing, catalogue. If no, you can send out us your sample, so we can make the drawing and sample appropriately.

four: What is the Warranty for your products?
A:Generally our warranty is one calendar year.

Contacts:

  in Mendoza Argentina  sales   price   shop   near me   near me shop   factory   supplier Steel 08b 12b 16b Roller Chain Sprockets manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Mendoza Argentina  sales   price   shop   near me   near me shop   factory   supplier Steel 08b 12b 16b Roller Chain Sprockets manufacturer   best   Cost   Custom   Cheap   wholesaler

Promotional made in China – replacement parts – in Kharkiv Ukraine Various Standard Size Roller Chain Sprocket with ce certificate top quality low price

Promotional  made in China - replacement parts -  in Kharkiv Ukraine  Various Standard Size Roller Chain Sprocket with ce certificate top quality low price

Promotional  made in China - replacement parts -  in Kharkiv Ukraine  Various Standard Size Roller Chain Sprocket with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 various branches. For a lot more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Item specification
one.Material:C forty five# metal ,stainless steel or EPT essential materials.

two.Sprockets can be created in accordance the customer’s drawings

three.Heat therapy: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on in accordance the demands..

four. Inspection: All objects are checked and examined totally in the course of every single working process and right after creation will be reinspected.

About us
HangZhou EPT Sprocket Co., Ltd. is a expert producer of different sprocket wheels, stainless steel sprocket wheels, non-standard sprocket wheels, massive pitch sprocket wheels, coupling sprocket wheels, spur gears, timing belt wheels, equipment racks, umbrella Equipment, worm equipment, shaft, sleeve and EPT transmission parts manufacturers. And according to buyer drawings, samples, measurement processing customized manufacturing. The company integrates style R & D, production and sales. In accordance with rigorous generation, inspection and top quality standards, the firm has proven a complete top quality system, generation approach and best quality manage. The company’s sprocket items are of high high quality, security and longevity.

The business now has 80 sets of a variety of higher-precision CNC lathes, gear hobbing equipment, gear shapers, tempering furnaces, quenching equipment, gantry planers, common milling, sawing machines, vertical broaching devices, hydraulic equipment and EPT processing gear, with an annual production capacity of 2 million parts . Carburizing and quenching, nitriding, quenching and EPT heat treatment, floor blackening, galvanizing, electrophoresis, and so on. At the identical time, it also has substantial-precision screening products this kind of as: Rockwell hardness tester, Vickers hardness tester, metallographic microscope, picture measuring instrument, Magnetic particle flaw detectors, etc. The items created are widely employed in metallurgy, metal, chemical, textile, agricultural equipment, a few-dimensional garages, packaging machinery, chemical equipment, pharmaceutical machinery, industrial and mining machinery and EPT industries. The item indicators satisfy the specifications of importing similar items and are exported to Hong Kong and ZheJiang , Southea EPT Asia, Europe, The us, the Middle Ea EPT and EPT areas, and are deeply trusted and praised by buyers.

FAQ
Q: Are you trading business or manufacturer ?
A: We are manufacturing facility.

Q: How prolonged is your shipping and delivery time?
A: Usually it is 5-10 days if the products are in inventory. or it is fifteen-twenty times if the goods are not in inventory, it is according to quantity.

Q: Do you give samples ? is it cost-free or added ?
A: Of course, we could offer the sample for cost-free charge but do not pay the co EPT of freight.

Q: What is your phrases of payment ?
A: Payment thirty%TT in progress. 70% T/T before shippment.

Q:What`s the MOQ of your goods?
A:1 established,we can also deal with the sample get. and the large-amount.

The use of unique equipment manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our firm and the listed alternative components contained herein are not sponsored, accredited, or made by the OEM.

Promotional  made in China - replacement parts -  in Kharkiv Ukraine  Various Standard Size Roller Chain Sprocket with ce certificate top quality low price

Promotional  made in China - replacement parts -  in Kharkiv Ukraine  Various Standard Size Roller Chain Sprocket with ce certificate top quality low price

Promotional  made in China - replacement parts -  in Kharkiv Ukraine  Various Standard Size Roller Chain Sprocket with ce certificate top quality low price

Industrial made in China – replacement parts – in Puducherry India Conveyor Large Roller Chain Steel professional Chain Factory Heavy Duty Silent Chain with ce certificate top quality low price

Industrial  made in China - replacement parts -  in Puducherry India  Conveyor Large Roller Chain Steel professional Chain Factory Heavy Duty Silent Chain with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

For Free Samples
Experienced Stuff
Prompt Delivery
International Approvals

Why choose us?
1.Xihu (We EPT Lake) Dis. Xihu (We EPT Lake) Dis.feng Chain CO.Ltd established in 2001, our company has been ranked top 10 among domestic chain industry.
2.We specialized in producing all kinds of chains and a lots of special chains, such as A or B series chains, conveyor chains, driving chains, cement chains, agricultural chains and so on.
3.Prodcucts strictly enforce the international standard(ISO),the Chinese standard(GB),American standard(ANSI),Germany standard(DIN),British standard(BS) and Japanese standard(JIS) and EPT standards,which can meet the requirements of the standard of different countries.

Should any of these items be of intere EPT to you,We will happy to give you a quotation upon receipt of your requirements.

We look forward to receiving your inquriy soon.

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Industrial  made in China - replacement parts -  in Puducherry India  Conveyor Large Roller Chain Steel professional Chain Factory Heavy Duty Silent Chain with ce certificate top quality low price

Industrial  made in China - replacement parts -  in Puducherry India  Conveyor Large Roller Chain Steel professional Chain Factory Heavy Duty Silent Chain with ce certificate top quality low price

Industrial  made in China - replacement parts -  in Puducherry India  Conveyor Large Roller Chain Steel professional Chain Factory Heavy Duty Silent Chain with ce certificate top quality low price